INTRODUCTION
This 300B SE valve amplifier is a class A power amplifier which has high linearity and low distortion, are capable to delivery 8W to 8Ω speaker for each channel. The first stage is SRPP constructed by 6SN7 twin-triode tubes and the final stage is a common-cathode 300B tube.
SPECIFICATION
● Vacuum tubes: two 300B and two 6SN7 vacuum tubes.
● Voltage gain: 5dB
● Gain flatness: <1dB for 20-20kHz
● 3-dB Bandwidth: 28kHz
● Frequency range: 20-20kHz
● Input Impedance: 90k Ohms
● Input sensitivity: 3.5V RMS
● S/N Ratio:
> 98dB (5W, 8 ohms, 1kHz)
● THD+N < 5% @1kHz
● Maximum Output Power: 8W at 8 Ohms
● Output transformer 15-20W:
Primary impedance: 2.5k/3.5k Ohms 120mA
Secondary impedance: 4, 8 and 16 Ohms
● Stereo single-end input and output
● Power requirements: 220-230V AC